• Home
• Electrical safety
• Workplace health & safety
• Industrial relations
• Corporate information

• 1. Introduction
• 2. The Electrical Safety Act 2002
• 3. The Electrical Safety Regulation 2002
  • 3.1 Part 2 – Electrical work
  • 3.2 Part 4 - Working around electrical parts
  • 3.3 Part 5 - Electrical installations
  • 3.4 Part 8 - Electrical supply
  • 3.5 Part 12 - Incident notification
  • 3.6 Part 13 - Miscellaneous provisions
  • 3.7 Schedule 2 - Exclusion zones
• 4. Risk management
• 5. Working de-energised
  • 5.1 Scope
  • 5.2 Regulatory requirement
  • 5.3 General
  • 5.4 Low voltage isolation and access
  • 5.5 High voltage isolation and access
• 6. Working live
  • 6.1 Scope
  • 6.2 Regulatory requirement
  • 6.3 Important issues when working live
  • 6.4 What to use to work safely
  • 6.5 Testing and fault-finding
• Appendix A
• Appendix B
  • 1 Common sources of electrical hazards
  • 2 Other electrical hazards to be addressed
  • 3 General elements of a safe system of work

	Print-friendly page
	Print full Electrical Work Code of Practice (471KB)

6.1 Scope

This section provides guidelines for safe electrical work practices when working live, within the restrictions set down by the Regulation. The section covers:

• Important issues when working live;
• The selection and use of tools, instruments and equipment for live work; and
• Testing and faultfinding. This part includes the importance of testing to confirm correct connections (including polarity test) – to ensure electrical safety.

Last updated July 16, 2009

Copyright | Disclaimer | Privacy | Access keys | Other languages

© The State of Queensland (Department of Justice and Attorney-General) 2009.

Queensland Government