Dangerous goods storage - Training providers, consultants, equipment suppliers
Disclaimer: The following information is provided by the Hazardous Industries and Chemicals Branch (HICB) as a free service to industry. Workplace Health and Safety Queensland (WHSQ) does not endorse the companies/organisations listed below. Also WHSQ provides no assurance as to the quality of the courses/services/goods listed. The list is not comprehensive; there are likely to be other businesses which offer relevant services/supplies but which are not listed here.
If you would like to have an entry for your business on this page, contact the HICB at hicb@justice.qld.gov.au .
Training Providers:
- AMOG Consulting
- Australasian Institute of Dangerous Goods Consultants (AIDGC)
- Australian Safety and Learning Systems (ASLS)
- Australian Safety and Training Alliance (ASTA)
- CSM Safety Services Pty Ltd
- Dangerous Goods Equipment and Training Pty Ltd
- DG Compliance Pty Ltd
- Environmental Risk Solutions (ERS)
- ERM Risk
- Field Enviro (Field Engineers Pty Ltd)
- Haz-Stor Australia Pty Ltd
- Health and Safety Essentials
- Icubed Environmental Pty Ltd I3e
- Kimberley Consultants
- Lloyd's Register - Safety and Risk
- McKenzie Group
- Microrisk
- ModuSpec Australia Pty Ltd
- Moore Consulting and Engineering (MCE)
- MOXI / Skill + Learning
- National Safety Council of Australia Ltd (NSCA)
- Noel Arnold and Associates Pty Ltd
- Parsons Brinckerhoff
- PCT Engineers Pty Ltd
- Peta Lywood Dangerous Goods Consulting
- Plastics and Chemical Industries Association (PACIA)
- R4Risk
- RKEJ Pty Ltd
- Safety Resource Centre
- Sherpa Consulting
- Simtars
- Sinclair Knight Merz
- TfA Project Group
AMOG Consulting
- An Australian engineering consultancy offering clients a range of highly-developed, specialist skills in concept development, risk and safety engineering and management, numerical and scale modelling, oil spill response planning, naval architecture, structural and hydrodynamic engineering, subsea, coastal and offshore engineering, environmental assessment and modelling of environmental processes, and advanced analysis.
- Provide independent advice and services to a diversity of clients in a range of sectors, including Oil and Gas, Petrochemical, Chemical Process, Resources, Defence, Transport, Energy, Utility and Manufacturing. Clients include oil companies, mining companies, federal, state and local government, and major on-shore and off-shore construction companies.
AMOG Consulting's Risk Management Services include:
- Formal Safety Assessments
- Hazard Identification including HAZID studies, Fault Tree Analysis (FTA), Failure Modes and Effects / Criticality (FMEA/FMECA) Analyses, Event Trees and Logic Diagrams
- HAZOP study and 'What If' scenario facilitation
- Safety Cases: development, implementation and review
- Quantitative and Qualitative Risk Assessments
- Demonstrating and Justifying ALARP
- Consequence Modelling: Fire, Blast, Smoke, Dispersion
- Independent Audits: MHF Safety Cases / Safety Reports, Safety Management Systems
- HSE Management Systems development
- Emergency Response Planning
- Project Risk Management
- Identifying, Assessing and Managing Critical Controls
- Human Factors Assessments and Organisational Risk Management Crisis Management
- Engineering Design Reviews including the use of Codes of Practice, Standards and Regulations
- Reliability, Availability and Maintainability (RAM) Assessments
- Accident / Incident Investigations
- Risk Software
- Training using in-house Training Modules
Contact:
Dr. Adam Brumley
Level 18, Central Park
152-158 St Georges Tce
PERTH WA 6000
Tel: (08) 9481 0500
Fax: (08) 9288 4400
Email: amogper@amog.com.au
Dr. Andrew Potts
Sea Technology House
19 Business Park Drive
NOTTING HILL VIC 3168
Tel: (03) 9558 9077
Fax: (03) 9558 9880
Email: amogmel@amog.com.au
Australasian Institute of Dangerous Goods Consultants
The Australasian Institute of Dangerous Goods Consultants (AIDGC) is an independent industry body that exists for the benefit of the dangerous goods industry, regulatory authorities, government, business and the general community. There are over 60 professional members who offer dangerous goods related services.
Our objective is to educate, promote, advise and consult on the safe storage and handling of dangerous goods. Since our establishment in 2001, we have built up a membership of consultants specialising in all classes of dangerous goods.
Our rigorous membership criteria mean you can be sure that all our members:
- are dangerous goods storage and handling specialists
- undertake ongoing professional development
- agree and adhere to a strict code of ethical behaviour
- have appropriate dangerous goods knowledge and demonstrated experience
- understand the regulations relevant to their expertise.
AIDGC Member consultants have met entrance requirements that include formal competency assessment and satisfying the AIDGC Board of an appropriate background of competence in the storage, handling and use of those classes/divisions of dangerous goods which are listed in the membership register.
Whether for once-off advice or for ongoing projects, dangerous goods consultants can work with you to determine all the specific characteristics and requirements of your site, from storage and transport to staff training - everything you need to make your workplace compliant and safe.
They can also bring you up to date with all the relevant laws and practices and then keep you informed as things change.
Current Queensland based AIDGC Member Consultants are:
Tim Dean
Peta Lywood
Frank Mendham
David Moore
Their contact details and those of other AIDGC Member Consultants can be found at www.aidgc.com/consultants.asp
AIDGC Associates are persons who demonstrate an interest in the aims of the AIDGC and in the storage, handling and use of selected classes/divisions of dangerous goods but who have not completed formal competency assessment to become full AIDGC Members.
Current AIDGC Associates in Queensland are:
|
Maurice Barnes |
Rando Nicolosi |
|
Bernard Dubois |
Wayne Palmer |
|
Tam Faragher |
Stephen Rutledge |
|
Robert Jorgenson |
Keith Sharp |
|
Gregory Nichols |
Anthony Warwick |
For details of Associates visit www.aidgc.com/associateMembers.asp
To find out more about the AIDGC, please visit www.aidgc.com. This FREE educational DVD explains the key issues for your business and where you can get the help you need. Order yours online now at www.aidgc.com
Australian Safety and Learning Systems (ASLS)
Two options are provided by ASLS to assist organisations to comply with the Dangerous Goods Safety Management Act 2001:
- Consultancy and Auditing
- Training Courses: Dangerous Goods handling for operations staff, Dangerous Goods Management for Supervisors and Managers (client-specific training)
Contact: For further information visit the ASLS website at www.asls.com.au or phone 07 3285 8199.
Australian Safety and Training Alliance (ASTA)
With full time staff operating in Bundaberg and Brisbane and Certified Consultants in Nambour, Maryborough, Hervey Bay, Gladstone and Mackay, ASTA can provide quality services and technical support to your business.
ASTA offers a range of services to help your organisation come to grips with all aspects of chemical management, no matter what stage your occupational health and safety program is at, including:
- Designing and implementing chemical management systems
- Performing Risk Assessments and identify health surveillance requirements.
- Conducting Hazardous Substances legal compliance audits in accordance with WHS Legislation
- Conducting Dangerous Goods legal compliance audits in accordance with Dangerous Goods Management legislation
- Review of storage facilities, identifying relevant regulatory and Australian Standards requirements for licensing self assessment
- Development of emergency plans and procedures
- Chemical awareness and management training courses - public or tailored to your organisation's needs
How Do You Benefit?
- Ensure legal compliance
- Reduced risk of injury and major incidents
- Knowledge allows you to make the best use of your money to control the major risks
Contact:
Jarrod Wilson
Brisbane Office
BTP Technology & Conference Centre
1 Clunies Ross Court
Eight Mile Plains QLD 4113
Head Office
33 Enterprise Street
Bundaberg QLD 4670
Mob: 0448 771 335 Ph: 1300 966 817 Fax: 07 4153 2811
Email : jarrod.wilson@austsafe.net.au Website: www.austsafe.net.au
CSM Safety Services Pty Ltd
CSM Safety Services Pty Ltd, providers of specialist services in the field of hazardous substances and dangerous goods management systems. We can provide your business with the following services:
- Compliance reviews and site audits
- Dangerous goods safety management systems
- Hazardous substances management systems
- Hazard identification and risk assessments
- Placarding guidance
- Manifest preparation
- Emergency response planning
- Chemical spill control solutions
CSM Safety Services Pty Ltd can also provide the following training:
- Introduction to hazardous substances in the workplace (0.5 day)
- Hazardous substances in the workplace (2 days)
- Dangerous Goods storage and handling (2 days)
Contact:
PO Box 4290
Kirwan, Qld, 4817
Ph: 07 4723 7652
Mobile: 0418 754 254
Email: craig@csmsafety.com.auWebsite: www.csmsafety.com.au
Dangerous Goods Equipment and Training Pty Ltd
Offers training, auditing and consultancy services covering industry's obligations under the Dangerous Goods Safety Management Act 2001. We offer:
- Advice on vehicle and facility design for the carriage and storage of Dangerous Goods.
- Advice on placarding buildings.
- Assistance with site licensing.
- Safety management systems and emergency procedure planning.
- Hazard and risk assessments.
- Dangerous goods training for all levels of staff.
- Supply of storage systems, spill containment and safety equipment for industry.
DGET will work with you to obtain the best outcomes for your business in regards to licensing, storage, signage and training. Customised site specific training is available.
Offices in Brisbane, Townsville and Sydney.
Web: dangerousgoodsequipment.com.au
Email: admin@dget.com.auPh: 1300 791 557
DG Compliance Pty Ltd
DG Compliance are experienced dangerous goods consultants specialising in the storage and handling of dangerous goods, in particular bulk flammable and combustible liquids compliance.
DGC offers competitive administrative and engineering solutions with prompt professional service extended to all dangerous goods locations including: Public, private, corporate, commercial, industrial, local council / Govt, mining, transport, marine and service industries.
Administrative Controls:
- Conduct Compliance Audits to AS 1940 ? The storage and handling of flammable & combustible liquids,
- Conduct risk assessment and hazard identification,
- Prepare flammable & combustible liquids license applications,
- Prepare DGSMA information procedures to facilitate site induction training workshops,
- Prepare documented - Safety Management Systems,
- Daily operational & maintenance procedures,
- Emergency response procedures.
Engineering Controls:
- Design / installation of above & under ground storage systems.
- Removal, decommission or abandon in situ of under ground storage systems.
- Conduct environmental site remediation (contaminated soils).
- Sales & Engineering retro fit fuel system upgrades including signage & spill kit equipment etc.
- Fuel system maintenance.
- Under ground storage tank Integrity testing including line tests.
- Calibrate liquid contents gauges.
- Installation of fusible link / watchman valve systems.
- Confined space entry.
Should your business require experienced advises on any of the above particulars please don't hesitate to contact DG Compliance Pty Ltd with any inquiry or if we can be of assistance in relation to the above services.
Contact: Greg Nicholls
Ph: 0432 304 250
Email: greg@dgcompliance.com.auWebsite: www.dgcompliance.com.auPostal: PO Box 5870, Brendale, Qld. 4500
Environmental Risk Solutions (ERS)
Environmental Risk Solutions Pty Ltd (ERS) is an Australian owned company which undertakes environmental, risk and safety assessment and training for a range of industries in accordance with relevant legislation. Services include:- formal hazard identification and risk assessment;
- dangerous goods storage advice and design;
- emergency planning;
- auditing, including SMS auditing and DGSM Act compliance;
- integrated risk management system development;
- MHF Safety Report preparation;
- Hazard and Operability Studies (HAZOP);
- environmental services such as EIS and management plans;
- air and water quality and atmospheric dispersion modelling;
- industrial site remediation: - assessments, investigation and clearance; and
- training.
Contact: Pauline Komoll
Ph: 07 3217 8433
Email: ersbris@ers.com.au
Website: www.ers.com.au
ERM Risk
ERM Risk is the risk management consultancy arm of Environmental Resources Management (ERM). ERM Risk offers a range of courses in accordance with relevant legislation, including:- hazard identification and hazard & operability (HAZOP) workshops;
- systematic risk assessments;
- development and audit of HSE management Systems;
- development of emergency response plans & procedures;
- minimisation of human contribution to accidents; and
- preparation of MHF safety reports.
ERM Risk also offers other services relevant to the onshore and offshore industries, such as formal safety assessments, reliability, availability and maintainability studies and safety integrity level (SIL) assessments.
Contact: Simon Meiers
Ph: +61 (0)2 8584 8888
Fax: +61 (0)2 8584 8800
Email: simon.meiers@erm.com
Website: www.erm.com
Field Enviro (Field Engineers Pty Ltd)
Environment, Health and Safety Consultants and Engineers
Field Enviro, a division of Field Engineers, is an environmental, health and safety consultancy has offices based in Mackay.
Services provided by Field Enviro include:
- legislative compliance auditing in accordance with:
- Workplace Health and Safety Act and Regulation
- Dangerous Goods Safety Management Act and Regulation
- hazardous substances and dangerous goods risk assessments
- occupational exposure monitoring and assessment
- environmental emissions testing
- carbon footprinting, NGERS auditing
- hazardous substance and dangerous goods storage location planning and design
- development of manifests, registers and emergency plans
- development of emergency plans
- development of safe management systems
- assistance for Environmentally Relevant Activity applications
- tailored chemical awareness training to meet legislative requirements.
Contact: David Corbett – Operations Manager
Unit 8, Site Business Park
38-42 Margaret Vella Drive
Paget QLD 4740
Ph: (07) 4952 1303
Mob: 0457 855 751
Fax: (07) 4952 1306
Email: dave.c@fieldengineers.com.au
Website: www.fieldengineers.com.au
Haz-Stor Australia Pty Ltd
- Owner Manager Stevan Davidson MSIA
- Trading since 1998
- Workplace health and safety officer No 01864165
- Member of Safety Institute of Australia Manufacturers of Dangerous Goods Storage exterior relocatables from 200lt --- 60,000 lt
- Fully GALVANISED and powder coated --240-205lt drums or 60only 1000lt IBC Pallets
- Internal cabinets 15lt - 250lt classes 2, 3, 5, 6.1, 8, 9
- Specializing in classes 5.1 and 5.2 air-conditioned and temperature controlled units compliant with AS 1940--AS 3833---AS 2714
- full range of racking and doors -plan1 zone 1 explosive proof lighting, full documentation supplied
- On site Risk Assessments and Safety Audits and advice on local Government Regulations
Health & Safety Essentials Pty Ltd
HSE can provide you with essential consulting and training services in relation to hazardous substances, dangerous goods and general chemical storage and use. Specialising in the effective management of chemicals in the workplace, HSE can assist you with: Consulting services:- Hazardous Substance and Dangerous Goods audits, inspections and general advice
- Facility Design and operation in accordance with legislation and Australian Standards
- Notification and Licensing
- Development Applications for dangerous goods facilities, including Major Hazard Facilities
- Preparing a hazardous substance and/or dangerous goods register
- Completing hazardous substances and/or dangerous goods risk assessments
- Placarding requirements
- Preparation of a Site Manifest
- Emergency planning
- Safety management systems - policies and procedures for dangerous goods and/or hazardous substances
- Facilitation of workshops - general hazard identification and risk assessment to structured HAZOP studies
- Major Hazard Facilities - Systematic risk assessment; Emergency planning; Community consultation; Safety report
- Hazardous Substance and Dangerous Goods - all aspects - courses can be tailored to your needs from 1-hour to 2-days
- HAZOP (Hazard and Operability Studies) - Introductory and Leaders courses
- Site Safety for Contaminated Land Consultants (similar to US HAZWOPER courses) - Introductory course (3-days); Project Managers course(1-day)
Ph: (07) 3822 1417
Fax: (07) 3822 9020
Mobile: 0400 017 797
Email: janelle.adrain@hse.com.auWeb: www.hse.com.au
Icubed Environmental Pty Ltd -I3e
Icubed Environmental is a specialist consultancy with a focus on Dangerous Goods Management, Energy and the Environment. Based in Queensland Icubed Environmental offer services in the following areas:- Safety Case/Report preparation
- Hazard Identification and Risk Assessment
- Bow Tie/Layer of Protection Analysis
- Development of Safety Management Systems
- Emergency response plans and procedures
- Incident/near miss investigations
- Design and development approvals management
- Project Management
- Safety Management System Audit
- DGSM compliance auditing
mobile: 0419 787 096 or
mail@i3e.com.auWebsite: www.i3e.com.au
Kimberley Consultants
Kimberley Consultants is an Australian owned company based in Queensland which provides health and safety risk management consultancy services to many industry sectors including chemicals, mining, minerals processing, oil and gas, and manufacturing. Clients include those with currently operating or planned Major Hazard Facilities (MHF) and Large Dangerous Goods Locations (LDGL). Services provided by Kimberley Consultants include:- Dangerous goods compliance to Australian Standards - advice and auditing
- Hazard identification studies
- Risk assessments
- Safety Case - development, implementation, review and auditing
- Safety Management Systems compliant with AS4801 - development, implementation, review and auditing
- Management system integration
- Compliance management
- Project risk management
Lloyd's Register - Safety and Risk
Lloyd's Register is an independent risk management organisation providing risk analysis and risk mitigation solutions and management system certification around the world. Lloyd's Register personnel carry out both qualitative assessments and quantitative studies to suit customer's specific needs. Our services cover:- Hazard identification (HAZOP, What If, Failure mode effect analysis, Fault tree analysis)
- Human error identification and management, including operator and maintenance error
- Human factors risk assessment, fatigue management
- Behaviour based safety programs
- Quantitative/Qualitative risk analysis
- Project risk management
- Safety cases
- Bow tie/layers of protection analysis assessments
- Fire safety analysis
- Ergonomics design guidance and review, control system interface design, alarm prioritisation
- RAM /SIL analysis
- Incident & accident analysis
- Expert witness
- Management Systems - development, auditing and training
(02) 8299 4141) or visit our website at: www.lr.org
McKenzie Group
The Risk Services branch of McKenzie Group provides specialist advice covering local, state and territory, and Commonwealth jurisdictions. Key services provided include safety and risk engineering, dangerous goods and hazardous substances management, management systems, laboratory management and general HSE compliance.
The range of our services includes, but is not limited to:
- Qualitative Risk Assessments
- Formal Safety Assessments/Quantitative Risk Assessments (QRA)
- Hazard Identification (HAZID) Leadership, Fault Tree/Event Tree Analysis (FTA/ETA), Failure Modes and Effects/Criticality (FMEA/FMECA) Analysis
- Process Hazard Analysis (PHA), HAZOP Leadership and 'What If' Scenario facilitation
- Statutory Auditing of Safety Case Reports/Major Hazard Facilities
- Safety Audits
- Risk/Cost-Benefit Analysis
- Demonstration of ALARP
- Hazard Register development and support
- Development of Safety Cases (offshore and onshore), including support
- Consequence Modelling: Fire, Dispersion/Toxicity
- Computational Fluid Dynamics (CFD) modelling for Smoke/Ventilation
- Project Risk Assessment
- Operational Risk Assessment
- Business Risk Assessment and Continuity Planning
- Dangerous Goods Management, including Audits, Licence Applications, Storage Advice and Design, general support
- Safety Management System development, Independent Assessment and support
Contact:
Brisbane Office
Level 4/490 Upper Edward Street
Spring Hill QLD 4000
Telephone 07 3834 9800
Facsimile 07 3834 9899
Email: email@mckenzie-group.com.au
Microrisk®
Microrisk® is an independent Queensland based risk management company with a Chartered Chemist and Registered Environmental, OH&S Auditor specialising in hazardous substances / dangerous goods who provide the following services to help clients maximise the return on the investment in their OH&S management systems:- Identification and verification of compliance with legal obligations and other requirements
- Hazard identification and risk assessment
- Development, training, internal audit, review and improvement of OH&S management systems based on OHSAS 18001 and AS 4801
- Integration of OH&S, environmental and quality management systems
- Second party audits of Contractor / Subcontractor OH&S and environmental project management plans
- Accident & incident investigation
- Expert witness
(0419 515 369)
ModuSpec Australia Pty Ltd
ModuSpec (www.moduspec.com) is an independent company that has been providing high-quality rig inspection, commissioning, training and risk management services to the drilling industry since 1986. For over two decades ModuSpec has been consulting to the drilling industry on the risks of equipment failure, the subsequent loss of productivity, and on the risks of operational and equipment-related incidents. Furthermore, ModuSpec is experienced in management system development and understands the importance of sustainable systems in the context of improving the safety, productivity and efficiency of the business process within an organisation. ModuSpec is a privately owned company, based in The Netherlands, with offices in the strategic centres for the oil and gas industry - Netherlands, Aberdeen, Brazil, Calgary, Houston, Singapore and Australia. ModuSpec employs approximately 300 people worldwide. Contact details: ModuSpec Australia Pty LtdSuite 9, 77 Mill Point Road
South Perth WA 6151
Australia T: +61 8 9474 2329
F: +61 8 9474 2392
E: perth@moduspec.comW: www.moduspec.com
MOXI / Skill + Learning
MOXI provides training, competency mapping and competency assessment to the oil and gas, mining, mineral processing and infrastructure industries - worldwide. MOXI training falls into the following categories: Electrical Equipment for Hazardous Areas (EEHA) courses; Technical Risk Management courses; E-learning courses. MOXI / SKILL + LEARNINGd: +61 8 6263 4413
d2: +61 7 3376 9845
m: +61 400 011 023
f: +61 8 9226 3900
t: 1300 668 992
e: enquiry@moxi.com.auw: www.moxi.com.au44 Kings Park Road, West Perth WA 6005
PO Box 519, West Perth, WA 6872 Contact: Sam Zacha
Moore Consulting and Engineering (MCE)
MCE is Australia's petrochemical design, risk and safety specialists. Combining years of practical experience with the best in technical expertise, MCE delivers end-to-end services to all industries across all areas of dangerous goods, hazardous areas, safety management and fluid management systems. When it comes to dealing with fuel, chemicals and risk you can rely on MCE to ensure that it is managed in an efficient, safe and cost-effective manner. Some of MCE's services include:- Dangerous Goods Site Compliance Assessments
- Auditing and Risk Assessments
- Dangerous Goods Legislative Compliance
- DGSM Council Directive Compliance
- Dangerous Goods Concept Design and Specification
- Hazard Identification and Risk Assessments
- ERA 11a Assessments and Submissions
- MSDS Development HAZOP's (Hazard and Operability Studies)
- Safety Management System Development
- OH&S Performance Monitoring and Reporting
- Emergency Response Plans
- MHF Reports
- Fire Studies
National Safety Council of Australia Ltd (NSCA)
NSCA can provide training, consulting, auditing and advisory services to assist organisations to comply with the Dangerous Goods Safety Management Act 2001.Courses Provided:- Storage and Handling of Dangerous Goods
- Chemical Management
- Hazard identification and risk analysis for the process industries
Noel Arnold and Associates Pty Ltd
Independent Training Providers and Consultants Noel Arnold & Associates (NAA) provides risk management and occupational health and safety consulting services. NAA has offices based in Melbourne, Sydney and Brisbane. Key services provided by NAA include:- Dangerous goods risk assessments;
- Chemical hazard and exposure assessments;
- Compliance audits in accordance with the relevant state legislation;
- Dangerous goods storage design review for building certification;
- Chemical storage facility design;
- Dangerous goods implementation;
- Development of manifests and registers;
- Development of Safe Management Systems; and
- Provision of a range of Dangerous Goods Training including how to manage the use, storage and disposal of chemical hazards.
Wade Russell - Queensland State Manager
4/301 Coronation Drive
Milton, QLD 4064
Tel: 07 3514 9222
Fax: 07 3514 9220
Email: brisbane@noel-arnold.com.auWebsite: www.noel-arnold.com.au
Parsons Brinckerhoff
Parsons Brinckerhoff (PB) has a team of specialists who offer a comprehensive range of services relevant to dangerous goods and hazardous materials storage and handling. We have experience and expertise providing the following professional services- Auditing of dangerous goods facilities
- Dangerous goods transport risk assessments and compliance
- Hazard identification and risk assessment
- Development of the following:
- Training and workshops
- Safety management systems
- Emergency plans & procedures,
- Emergency services manifests
- Development applications and town planning for hazardous industries:
- Environmentally Relevant Activity development applications
- Flammable and combustible liquids licence application needs
- OH&S surveys, indoor air quality investigations, asbestos surveys, and occupational hygiene monitoring
- NATA accredited asbestos identification laboratory
- Design of package storage facilities, ventilation systems, tank farm storage.
Website: www.pb.com.au and www.pbworld.com
PCT Engineers Pty Ltd
PCT Engineers offers assistance in many aspects of Major Hazard Facility management, including:- Hazardous Area Classification (HAC) and EEHA Auditing - DUSTS, GASES and VAPOURS (ESO Accredited Auditors);
- Conformity assessments to Australian Standards for non-AUS Ex certified equipment;
- Control system trouble shooting, design and upgrades;
- Risk Identification, Assessment and Management;
- Safety Instrumented Systems (SIS) to IEC61511;
- Safety Integrity Level (SIL) verification;
- HAZOP, CHAZOP & HAZAN leadership services;
- Education and Training - Certified Functional Safety Expert (CFSE) & Hazardous Area competencies;
- Incident Investigation and reporting;
- Auditing of dangerous goods safety management;
- Hazard and risk analysis;
- Hazard and operability studies;
- Development of safety management systems, emergency plans, manifests; and
- Design and development of preventative mitigation.
Peta Lywood Dangerous Goods Consulting
Consulting in the area of dangerous goods and hazardous substances to assist organizations meet their obligations under the:- QLD Dangerous Goods Safety Management Act and Regulations
- QLD Workplace Health & Safety Act and Regulations
- Preparation of LDGL Notification to CHEM services and Flammable & Combustible Liquid Licenses to QLD Local Governments;
- Audits of workplaces to determine their obligations under the above legislation;
- Review or preparation of concept designs for dangerous goods storage facilities in accordance with state legislation and Australian Standards;
- Assistance with building development applications and design documentation;
- Initiating and carrying out hazard identification and risk assessment programs in consultation with the client;
- Assistance with MSDS, Registers, Safety placarding and Emergency Services Manifests;
- Emergency plans and procedures;
- Safety Management Systems;
- Regularly traveling to regional areas of QLD and Northern NSW; and
- Able to work as part of a larger specialist project team or on an individual consulting basis.
Plastics and Chemical Industries Association (PACIA)
Courses Provided:PACIA conduct a range of courses on the management of hazardous substances and dangerous goods.Contact: Jenny McLean on phone (03) 9429 0670, or fax (03) 9429 0690, or email jmclean@pacia.org.auWebsite: www.pacia.org.auR4Risk
R4Risk is an independent consulting firm providing services in the fields of risk management and process safety to companies across a broad range of industries.
R4Risk’s mission is to assist its clients to manage their risks effectively, efficiently and sustainably, through technically superior risk management. We have extensive and varied experience in industry and risk consulting, and are able to tailor our services to find the best solution for your risk management needs.
R4Risk’s services include:
- Safety Case Development
- Major Hazard Facilities Safety Management
- Safety Management System Development
- Compliance Auditing
- Process Safety Management
- Fire Safety Studies
- Hazard Identification (HAZOP, HAZID, What-if)
- Consequence Analysis (Fire, Explosion and Toxic)
- Risk Assessment (Quantitative and Qualitative)
- Layers of Protection Analysis / Bowtie / SIL Studies
- Risk Assessment Workshop Facilitation
- Land Use Planning Risk Studies
- Occupied Buildings Risk Assessments
- Emergency Response Planning
- Dangerous Goods Assessments
- Hydraulic Analysis of Fire Systems
- Loss Prevention
- Safety in Design Assessment
- Accident Investigation
- Process Safety and Risk Management Training
Contact: For further information, contact:
Lachlan Dreher
Phone: (03) 9528 3670
Mobile: 0418 522 621
Email: solutions@r4risk.com.au
RKEJ Pty Ltd
The organisation provides consulting services to assist organisations to comply with the requirements of the Dangerous Goods Safety Management Act 2001. This includes:-- assisting organisations to identify their obligations and
- helping them to develop appropriate action plans.
- auditing of dangerous goods safety management issues;
- carrying out hazard and risk analyses;
- carrying out hazard and operability studies;
- development of safety management systems, emergency plans and manifests;
- assistance with development applications and relevant licensing involving dangerous goods.
Robert Jorgensen
RKEJ Pty Ltd
2 Cranfield Street
Sunnybank Hills Qld 4109Phone: (07) 3344 4623
Fax: (07) 3344 6775
Mobile: 0407 117 343
Email: info@rkej.com.auWebsite: www.rkej.com.au
Safety Resource Centre
The Safety Resource Centre provides advice, support and training. Services include:- Statutory Compliance Audits and Targeted Action Plans
- Hazard Identification and Risk Management systems and training
- Safety Management Systems
- Emergency Plans and Procedures
- Strategic Planning
- Change Management Support
- Executive Briefing Seminars
- Specialist advice in specific areas
Sherpa Consulting
Sherpa Consulting is an independent and highly skilled team of safety and risk engineers, based in Australia, with extensive industry experience in onshore and offshore oil and gas, chemical handling and processing, and critical infrastructure projects in South East Asia and Australia. Specifically, the team has completed Major Hazard Facility and Dangerous Goods support for operators throughout Australia. In Queensland, Sherpa has assisted MHF Operators with developing the Safety Report Goal Setting, Systematic Risk Assessments and reviewing Safety Report submissions. Sherpa's aim is to deliver tailored HSE engineering and risk management services to our clients. Our technical capabilities are supported by continuous technical development, proprietary software, partnerships with world leading HSE Engineering 'think tanks' in the USA and UK, and an independent approach to doing business. Examples of our range of services are:- MHF support, including:
- Planning and strategy development
- Inherent safety
- Systematic Risk Assessments
- Qualitative /quantitative risk assessment
- Systematic Risk Assessments
- ALARP demonstration (and Bowtie workshop facilitation)
- Development of Safety Critical Elements, Performance Standards and KPIs
- Verification of safeguards
- Safety Report documentation
- Independent HSE (process safety and environmental) audits
- DG support
- Specialist Safety Studies, including:
- HAZOP
- CHAZOP
- SIL
- FMECA
- Consequence modeling
stuart.chia@sherpaconsulting.com.auGiles Peach, Director, Tel. +61 (0)2 9416 4555
giles.peach@sherpaconsulting.com.auWebsite: Further information and contact details may be found on our website www.sherpaconsulting.com.au
Simtars
Simtars provides consultancy-based services in dangerous goods and hazardous substances. These services include:- Auditing of dangerous goods safety management;
- Exposure assessments;
- Hazard and risk analysis;
- Training in hazardous substances and dangerous goods management;
- Environmental assessment and impact;
- Development of safety management systems, emergency plans, manifests; and
- Design and development of risk mitigation strategies.
Sinclair Knight Merz
Sinclair Knight Merz is a leading project delivery firm providing engineers, scientists, planners, economists, architects, project managers and logisticians. We operate across five broad markets: Buildings & Property; Infrastructure; Power & Industry; Resources; and Water & Environment. SKM is committed to the provision of quality risk management services, including dangerous goods services. Here is a broad snapshot of risk services available:- Qualitative Risk
- Quantitative Risk
- Semi-Quantitative Risk
- Safety in Design
- Business Risk
- Management Systems
- Training Package Design and Delivery
- Incident Investigation
- Safety Case
- Mine Closure
Hendrik Tait
Ph: +61 2 3244 7100 / 0427 602 141
Email: htait@skm.com.auChris Beale
Level 3, 104 Melbourne Street, South Brisbane, Queensland
PO Box 3848, South Brisbane, Queensland, 4101
Tel: +61 7 3026 7951
Fax: +61 7 3026 7305
Mobile: +61 (0)421 617 435
Email: cbeale@skm.com.au
Website: www.skmconsulting.com
TfA Project Group
TfA are consulting engineers who specialise in the design of flammable and combustible liquids storage and distribution facilities. We work extensively for all major Oil Companies and clients within the Mining Industry and Defence Force. We have designed Service Stations, Truck Stops, Oil Terminals and Blending Plants, Fuel Depots, Timber Treatment Facilities, Mining Refuelling and Workshop Lubrication Facilities and Aviation Hydrant System Refuelling Facilities. TfA can assist with:- Project Management
- Detailed Design of new facilities
- Construction Management
- Commissioning
- Compliance Reviews and Site Audits
- As Built P&ID documentation
- Hazardous Area Classification
- HAZOP Safety Reviews
Keith Sharp
Engineering Manager
Ph 07-3854-2924
Fax 07-3854-2999
Email: keith@tfa.com.au
Other languages