How much does it cost to register plant?
The same fees apply to an original application for registration or a renewal of registration plant, if the plant is registered for the full twelve months. Otherwise a pro rata fee will apply.
The following table extracted from Schedule 1 of the Workplace Health and Safety Regulation 2008 sets out the fee for registration or renewal of registration of registrable plant.
|
Type of plant |
Fee amount |
|
(a) subject to subsection (3), for a boiler with a heating surface of - | |
|
(i) not more than 5 m2 |
61.50 |
|
(ii) more than 5 m2 but 10 m2 or less |
147.25 |
|
(iii) more than 10 m2 but 60 m2 or less |
231.30 |
|
(iv) more than 60 m2 but 500 m2 or less |
443.10 |
|
(v) more than 500 m2 but 2000 m2 or less |
784.00 |
|
(vi) more than 2000 m2 |
1324.00 |
|
(b) for an unfired pressure vessel with a capacity of - | |
|
(i) more than 0.5 m3 but 5 m3 or less |
66.60 |
|
(ii) more than 5 m3 but 15 m3 or less |
113.80 |
|
(iii) more than 15 m3 but 30 m3 or less |
171.40 |
|
(iv) more than 30 m3 |
225.50 |
|
(c) for a crane or hoist, other than a vehicle hoist, building maintenance unit or elevating work platform, with a safe working load of - | |
|
(i) not more than 10 t |
124.20 |
|
(ii) more than 10 t but 50 t or less |
261.30 |
|
(iii) more than 50 t |
326.85 |
|
(d) for a truck-mounted concrete placing unit with boom, other than manually powered |
124.20 |
|
(e) for a building maintenance unit |
67.85 |
|
(f) for a service lift |
47.10 |
|
(g) for a lift other than a service lift |
81.60 plus 18.80 for each floor |
|
(h) for an escalator |
63.20 |
|
(i) for an airconditioning unit |
154.15 |
|
(j) for a specified amusement device classified as | |
|
(i) a class 2 amusement device in AS 3533, part 1 as in force on 5 December 1997, other than a coin operated amusement device |
124.20 |
|
(ii) a class 3 amusement device |
189.90 |
|
(iii) a class 4 amusement device |
261.30 |
|
(iv) a class 5 amusement device |
261.30 |
|
(3) If a boiler is heated electrically, the fee payable must be worked out on the basis that 1 kW equals 0.08 m2 of heating surface. | |
